literature for crushed granite stone as replacement of fine aggregate

  • A Review of Partial Replacement of Fine Aggregate & Coarse

    the crushed granite with coconut shell aggregate can be economically used in reinforced concrete. 3. CONCLUSIONS [2]From the above mentioned work of assorted researchers, it's clear that waste glass powder & coconut shell is used as a partial replacement of fine aggregate & coarse aggregate in

    Chat Online
  • (PDF) Crushed stone waste as fine aggregate for concrete

    Sahu A.K.,et al [8] studied the crushed stone waste as fine aggregate in concrete. Concrete made with this replacement can attain lower degree of shrinkage as the control concrete.

    Chat Online
  • PARTIAL REPLACEMENT OF COARSE AGGREGATE BY USING

    aggregate as partial coarse aggregate replacement. Granite aggregate has been replaced by 10, 20, 30, 40 and 50% with laterite aggregate. All the specimens were subjected to water curing until it is ready to be tested. Tests on compressive strength, flexural strength and modulus of elasticity were carried out at the age of 7, 14, 28 and 60 days.

    Chat Online
  • The Utilization Of Crushed Stone Dust As A Replacement

    In the crusher machine after crushing of stone the product retained known as crushed stone dust. If can be used as a fine aggregate in cement concrete as a replacement of sand it may be replace fully or partially as a percentage of 20%, 40%, 50%, 60%, 80% of gives the higher strength as that of sand gives with the help of suitable admixtures.

    Chat Online
  • IRJET-Experimental Study on Partial Replacement of Fine

    PROPERTIES AND MATERIAL USED aggregate having a fineness modulus of approximately 4.0%. 3.1 Cement Bulking obtained for crushed stone aggregate was 47.5% while for coconut shell powder bulking was around 35% ISI marked OPC 53 Grade cement was used in this work with which is much lower to that of crushed stone aggregate. specific gravity of 2.74

    Chat Online
  • An Experimental study on Crushed Stone Dust as Fine

    1/1/2018· Many researchers [3-10] have been find out the solid wastes as an alternative materials as fine aggregate i.e. Fly ash ,Slag limestone ,waste plastic and Crushed stone dust etc. A critical literature review also suggest that Crushed stone dust (CSD) can be used as an alternative of cement concrete materials and most of earlier studies are based

    Chat Online
  • Partial Replacement of Fine Aggregate by Glass Powder in

    Concrete is prepared by mixing various materials like cement, Water, aggregates etc. which are economically available. IS 8112 is used for the work. The fine aggregate used in this investigation was clean river sand, whose maximum size is 4.75 mm, conforming to grading zone II. Machine crushed blue granite stone is used as coarse aggregate .

    Chat Online
  • Geo Polymer Concrete with the Replacement of Granite

    Literature Review . Hamza et.al (2011) introduced granite waste into concrete concrete with stone dust as fine aggregate, draws the % replacement of granite powder with sand as per the mix design for every 50 ml of water about 61g of granite powder was added. The

    Chat Online
  • A Study on the Utilization of Coconut Shell as Coarse

    coconut shells were used to replace crushed granite by volume. The density and compressive strength of concrete were found to reduce as the percentage replacement increased. Concrete produced with 20%, 30%, 40%, 50% and 100% replacement attained 28-day compressive strengths of 19.7 N/mm2, 18.68 N/mm2, 17.57 N/mm2, 16.65 N/mm2

    Chat Online
  • Replacement Of Coarse Aggregate In Concrete [Civil

    The crushed glass particles may be used in concrete partially instead of granite rock. The workability & compressive strength will reduce when using waste glass particles. So the glass concrete may be used in filler areas like deck slabs. Tests To Be Conducted To Find Successful Coarse Aggregate Replacement

    Chat Online
  • PARTIAL REPLACEMENT OF COARSE AGGREGATE BY USING CRUSHED

    aggregate as partial coarse aggregate replacement. Granite aggregate has been replaced by 10, 20, 30, 40 and 50% with laterite aggregate. All the specimens were subjected to water curing until it is ready to be tested. Tests on compressive strength, flexural strength and modulus of elasticity were carried out at the age of 7, 14, 28 and 60 days.

    Chat Online
  • Experimental Study of Partial Replacement of Fine

    2 Coarse aggregate: Machine crushed granite obtained from a local quarry was used as coarse aggregate. The properties of the coarse aggregate are shown in table 3 (37.5N/mm2) replacement of fine aggregate by industrial waste which was greater than the conventional concrete. The compressive strength reduced beyond 30% replacement.

    Chat Online
  • Partial Replacement of Coarse Aggregate with Broken

    Abstract— The study reports on experimental investigation on the suitability of the use of broken tiles as partial replacement for crushed granite in concrete production. Control mixing ratio of 1:2:4 batched by weight with water cement ratio of 0.55 was used. The percentage replacement varied from 0% to 40% at intervals of 5%.

    Chat Online
  • A review on Properties of Sustainable Concrete using

    7/10/2016· Sailalasa and Reddy (2015) investigated the effect of replacement of natural fine aggregate by granite aggregate on the compressive strength of geo polymer concrete. They observed that 28 days compressive strength increased with increase in granite aggregate content and maximum increment was observed for 15% sand replacement and its values was

    Chat Online
  • A Study on the Utilization of Coconut Shell as Coarse

    coconut shells were used to replace crushed granite by volume. The density and compressive strength of concrete were found to reduce as the percentage replacement increased. Concrete produced with 20%, 30%, 40%, 50% and 100% replacement attained 28-day compressive strengths of 19.7 N/mm2, 18.68 N/mm2, 17.57 N/mm2, 16.65 N/mm2

    Chat Online
  • Geo Polymer Concrete with the Replacement of Granite

    Literature Review . Hamza et.al (2011) introduced granite waste into concrete concrete with stone dust as fine aggregate, draws the % replacement of granite powder with sand as per the mix design for every 50 ml of water about 61g of granite powder was added. The

    Chat Online
  • Comprehensive literature review on use of waste product in

    C) CRUSHED GRANITE FINE (CGF): The maximum size of the gravel used as coarse aggregate was 37.50mm, with a unit weight of 1540kg/m3 and a specific gravity of 2.65. Particle size distribution of the coarse aggregate used. Naturally occurring clean sand used was

    Chat Online
  • Use of Quarry Dust to Replace Sand in Concrete An

    Coarse aggregate of 20mm maximum size is used in Reinforced cement concrete work of all types of structures. This is obtained by crushing the stone boulders of size 100 to 150mm in the stone crushers. Then it is sieved and the particles passing through 20 mm and retained on 10mm sieve known as course aggregate.

    Chat Online
  • Replacement Of Coarse Aggregate In Concrete [Civil

    The crushed glass particles may be used in concrete partially instead of granite rock. The workability & compressive strength will reduce when using waste glass particles. So the glass concrete may be used in filler areas like deck slabs. Tests To Be Conducted To Find Successful Coarse Aggregate Replacement

    Chat Online
  • QUESTION 1.edited.docx QUESTION 1 Partial

    QUESTION 1: Partial Replacement of aggregate in concrete Concrete is one of the oldest manufactured construction materials used in construction of various structures around the world. The increasing utilization of natural aggregate for concrete production has created negative impact towards environment. Thus, investigation on searching for alternative material which has potential to replace

    Chat Online
ZhengZhou N-CAI Corporation © 2020 Copyright.Crusher